Dental Hypotheses

ORIGINAL RESEARCH
Year
: 2020  |  Volume : 11  |  Issue : 3  |  Page : 74--85

Fabrication and Characterization of Porous Bioceramic-Magnetite Biocomposite for Maxillofacial Fractures Application


Amirsalar Khandan1, Ehsan Nassireslami2, Saeed Saber-Samandari3, Nahid Arabi4 
1 Toxicology Research Center, AJA University of Medical Sciences, Tehran, Iran
2 Toxicology Research Center, AJA University of Medical Sciences, Tehran; Department of Pharmacology and Toxicology, AJA University of Medical Sciences, Tehran, Iran
3 New Technologies Research Center, Amirkabir University of Technology, Tehran, Iran
4 Pediatric Oncology & Hematology, Pediatric Department, AJA University of Medical Sciences, Tehran, Iran

Correspondence Address:
Ehsan Nassireslami
Department of Pharmacology and Toxicology, AJA University of Medical Sciences, Tehran
Iran

Introduction: Advantages of using porous bio-nanocomposite scaffolds for maxillofacial fracture application and optimizing the internal surfaces of synthetic grafts using nanotechnology can accelerate the bone cell adhesion, mechanical properties and absorption rates. There are various studies that have been performed on porous scaffold, especially for the fractured and destroyed parts of the facial bones. The aim of this study was to investigate the experimental and numerical analysis of the porous scaffold, which undertakes static and dynamic loading conditions. Materials and Methods: The maxillofacial bone was modeled using the solid works software, and then it was inserted into the Abaqus software to achieve a more precise model that utilizes an isotropic linear substance. Thereafter, a proper micromechanical model reported evaluating the elastic modulus response on porosity value using various models. Additionally, an experimental analysis was conducted on a new calcium silicate (CS) bioceramic reinforced with magnetite nanoparticles (MNPs) using the space holder technique coated with the gentamicin drug loaded on gelatin polymer. The response of the bio-nanocomposites shape, which corresponds to different MNPs’ weight fractions, was determined using the scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques. Results: The analysis of the scaffold implant showed that it is tightened at a torque of stiffness of 3 mm in the implant, which leads to high mechanical tension. The results showed that the elastic modulus of the nanocomposites increased from 60±5 MPa to 145±5 MPa with increasing 15 wt% MNPs to the calcium silicate nanoparticles. Conclusion: The results indicated that addition of 15 wt% MNPs to the based bioceramics increased both compression strength and decrease the porosity value.


How to cite this article:
Khandan A, Nassireslami E, Saber-Samandari S, Arabi N. Fabrication and Characterization of Porous Bioceramic-Magnetite Biocomposite for Maxillofacial Fractures Application.Dent Hypotheses 2020;11:74-85


How to cite this URL:
Khandan A, Nassireslami E, Saber-Samandari S, Arabi N. Fabrication and Characterization of Porous Bioceramic-Magnetite Biocomposite for Maxillofacial Fractures Application. Dent Hypotheses [serial online] 2020 [cited 2020 Aug 13 ];11:74-85
Available from: http://www.dentalhypotheses.com/article.asp?issn=2155-8213;year=2020;volume=11;issue=3;spage=74;epage=85;aulast=Khandan;type=0